Do you have a project in mind for a new home or business remodel? If so, you may want to be aware that hanging and finishing the drywall is not an easy task. Even though experience is the best teacher of all, having some knowledge can save you significant time and money. You need to make the first decision about what type and thickness drywall will work best for you. It is recommended to use green board when installing drywall in damp or wet areas. This type drywall is commonly used in surrounds for bathtubs and showers. If moisture is not a concern then the next question you should ask yourself is, what thickness ofdrywall would best suit your needs? Thicker sheets ofdrywall such as 3/4″ are often used for insulation or to increase stability and security. For interior applications, 1/4″ or 1/2″ dry wall will suffice. Let’s read more about drywall installer.
The next step is to cut the desired dimensions of the drywall. Remember that most residential and commercial constructions have studs measuring 16 inches on the center. For a 4×8 foot drywall piece, measure from the center of the stud to avoid measuring to the edge. This is because almost every sheet will be installed next to the one you are measuring. In order to make sure that the sheets are secure, both sheets must be joined in the center. After measuring the board, cut it with a box-knife on the outer side. You do not have to go through the entire drywall. This can cause board pieces to crack or become brittle. When pressure is applied, the sheet will easily tear along the scored line. For those with less experience, it may be helpful to lay the scored edge across a flat surface.